RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0103549 PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) T

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU)  PROBLEM SYMPTOMS TABLE  


NOTICE:

When replacing the television camera assembly, refer to Calibration.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU)>CALIBRATION


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General
Symptom Suspected Area Link
The parking assist monitor screen is distorted (there is screen noise). Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" Click here
When the shift lever is in R, the parking assist monitor image is not displayed (screen is not black). Proceed to "Reverse Signal Circuit" Click here
Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" Click here
Television camera assembly Click here
When the shift lever is in R, the parking assist monitor image is not displayed (screen is black). Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" Click here
When the parking assist monitor is displayed, the screen switches to the multimedia screen even though an operation has not been performed. Proceed to "Reverse Signal Circuit" Click here
Television camera assembly Click here
When the shift lever is not in R, the parking assist monitor image is displayed. Proceed to "Reverse Signal Circuit" Click here
Television camera assembly Click here
When the shift lever is moved to R, the parking assist monitor is not displayed (navigation screen remains displayed). Proceed to "Reverse Signal Circuit" Click here
Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" Click here

Display Malfunction
Symptom Suspected Area Link
Image from the camera for the parking assist monitor is abnormal. Calibration Click here
Television camera assembly Click here
Spiral with sensor cable sub-assembly Click here
The guide lines are displayed with the steering linked lines and fixed lines overlapping. Television camera assembly Click here
Navigation receiver assembly (for Navigation Receiver Type) Click here
Radio and display receiver assembly (for Radio and Display Type) Click here

Parking Assist Monitor System Malfunction
Symptom Suspected Area Link
The estimated course lines are not displayed. Parking assist monitor screen display mode settings. (Check if the parking guide lines are set to off.) Click here
Steering angle setting Click here
Television camera assembly Click here
Navigation receiver assembly (for Navigation Receiver Type) Click here
Radio and display receiver assembly (for Radio and Display Type) Click here
Guide lines are not displayed for all parking assist monitor screen display modes. Check if the back door is not closed -
Steering angle setting Click here
Back camera position setting Click here
Television camera assembly Click here
The guide lines remain displayed even though the back door is open. Proceed to "Guide Lines are not Displayed for All Display Modes" Click here
Television camera assembly Click here
The guide lines do not display even though the back door is closed. Proceed to "Guide Lines are not Displayed for All Display Modes" Click here
Television camera assembly Click here
The guide line switching screen is not displayed. Television camera assembly Click here
Navigation receiver assembly (for Navigation Receiver Type) Click here
Radio and display receiver assembly (for Radio and Display Type) Click here
A guide line mode other than the one selected is displayed. CAN communication system (for LHD) Click here
CAN communication system (for RHD) Click here
Television camera assembly Click here
Navigation receiver assembly (for Navigation Receiver Type) Click here
Radio and display receiver assembly (for Radio and Display Type) Click here
The button for the selected guide line mode does not change to the set color. A different button changes to the set color. CAN communication system (for LHD) Click here
CAN communication system (for RHD) Click here
Television camera assembly Click here
Navigation receiver assembly (for Navigation Receiver Type) Click here
Radio and display receiver assembly (for Radio and Display Type) Click here
The display mode switch screen button cannot be pushed. CAN communication system (for LHD) Click here
CAN communication system (for RHD) Click here
Proceed to "Speed Signal Circuit" in Meter / Gauge System Click here